Anodes: |
Hard Chrome Plating, Decorative Chrome Plating, Anodizing,
Tin & Solder Electroplating, Hot Air Leveling, Galvanizing, Metallizing |
 |
|
Alloys: |
- Alchemy utilizes only the finest primary materials in the manufacturing of its products.
- Find below a list of the raw metals that we alloy with to produce any configuration you require.
- Tin (Sn): Complies to ASTM B339 - Grade "A" Tin.
- Lead (Pb): Complies with ASTM B29 - Corroding Grade Lead.
- Antimony (Sb): Complies with ASTM B237 - Grade "B" Antimony.
- Cadmium (Cd): Complies to ASTM B440
- We also produce alloys with additions of Silver (Ag), Bismuth (Bi), and Aluminum (Al).
- We recycle used anodes from the chrome plating industry
|
|
Standard Extruded Configurations: |
|
| |
| Whether extruded or hand cast in our wide range of alloys and configurations, each of our anodes go through the same process to produce a fine grain structure essential
for even plate-out and maximum throwing. |
|
|
|
|
| Sample Picture |
Configuration Name |
Dimensions |
Metal |
 |
ROUND |
1/8" - 4" Dia
Various Lengths |
Tin
Lead
Tin/Lead Alloys |
 |
SQUARE |
1/8" x 1/8" - 3" x 3"
Various Lengths |
Tin
Lead
Tin/Lead Alloys |
 |
RECTANGLE |
1/8" - 3"
Max. Width = 5"
Various Lengths |
Tin
Lead
Tin/Lead Alloys |
 |
"D" STYLE |
2" x 3"
Various Lengths |
Tin
Tin/Lead Alloys |
 |
OVAL |
2" x 3"
Various Lengths |
Tin
Tin/Lead Alloys |
 |
ELLIPTICAL |
2" x 3"
Various Lengths |
Tin
Tin/Lead Alloys |
 |
ROSETTE |
1-1/2" & 2" OD
Various Lengths |
Tin
Lead
Tin/Lead Alloys |
 |
12 POINT |
3" OD
Various Lengths |
Tin
Tin/Lead Alloys |
 |
16 POINT |
3" OD
Various Lengths |
Tin
Tin/Lead Alloys |
 |
SAWTOOTH |
1-1/4" x 4"
Various Lengths |
Lead
Tin/Lead Alloys |
 |
ZIG ZAG |
3/16" x 3" with 7/16" Centre
Various Lengths |
Lead
Tin/Lead Alloys |
 |
RIBBED |
3/4" x 3"
Various Lengths |
Lead
Tin/Lead Alloys |
- We also produce Lead anodes with cores such as copper, mild steel to name a few.
- All our Lead Alloyed Anodes are available with either Cast Bronze or Copper Hooks, which are cast into nobbins and lead burned onto the anode stock. (All nobbin & burning
bar used in homogenous bonding are of the same alloy as the anode stock).
- Tin & Tin/Lead (Solder) Anodes are supplied drilled with a 3/8" Diameter hole and tapped (16 thread) to 1-1/4" Deep.
|
|
